- Four precision-ground column design feature adds stability when raising and lowering the table.
- Infeed and outfeed rollers are adjustable and rubber coated to support your workpiece without marring the wood.
- Exclusive angled 4" dust port keeps the dust hose out of the way while providing efficient chip and dust removal.
- Molding cutter head accommodates more than 40 standard molding cutter sets.
- Top-ed height adjustment handle is easy to use for quick table height changes.
- Two-speed gearbox has feed rates set for optimum planing and molding results.
Product Description
-------------------
We see a future built on great brands, great products and great
people. In every facet of our business we leverage the strengths
of our global infrastructure to maximize the benefits of all
three.
.com
----
Boasting a 1-1/2-horsepower motor, the Jet 708524 JPM-13CS
planer/molder produces a superior finish with its three-cutter
head design and can handle material up to 13 inches wide and up
to 6 inches in height. A sturdy cast-iron table and base provide
strength and reduce vibration during use, and built-in lockable
casters add support and stability while allowing easy
maneuverability.
Designed and built with the home woodworking shop in mind (view
larger).
Power Base for Home Woodworking
-------------------------------
Designed and built with the home woodworking shop in mind, the
Jet 708524 JPM-13CS has a totally enclosed 1-1/2-horsepower,
115-volt motor that can easily be rewired to 230 volts. The motor
delivers its power to the cutterhead assembly through a pair of
V-belts running in precision-machined multi-groove pulleys. A
removable side door on the cabinet provides access to the motor
and its belt-tensioning should adjustment become necessary
in the future.
Superior Cutting and Feeding
----------------------------
The JPM-13CS features an all-steel, precision-machined cutterhead
(2-9/16-inch diameter) fitted with three full-width knives. The
knives are retained by three-piece wedge-shaped gibs that allow
for the installation of many molding- profiles without
removing the planer blades. The center gib section makes
installing most molding knives easy (2 inches wide and under).
The planer/molder has two feed rates, with the high 20 FPM (feet
per minute) setting used primarily for dimensioning wood when
lots of material is being removed quickly. The 10 FPM speed is
used for finish cuts when the smoothest possible surface is
desired, and this slower feed rate is also used for molding
operations.
Rubber-covered infeed and outfeed rollers keep the stock moving
at a consistent pace, and the rubber feed roller surface gets a
good grip on the wood without marring the profiled surface of
molded wood. Both of the feed rollers are easily adjustable to
maintain their performance.
Generously Sized, High-Quality Table
------------------------------------
The cast-iron table lends plenty of heft and contact surface,
measuring 19-1/4 inches long by 14 inches wide. The table has 6
inches of travel maintained by lead screws on either side and is
driven by an easy-to-use hand crank on top of the machine. Handy
metric and inch scales flank the infeed housing opening to make
adjusting cut depth simple and accurate. It comes with an
incorporated dust chute--so it's simple to hook up to a dust
collector and keep the shop clean. Four lockable casters (not
standard) make it easy to maneuver the tool in a tight shop. It's
backed by a five-year limited warranty.
What's in the Box
-----------------
One Jet 708524 JPM-13CS planer/molder, and operating and assembly
instructions.
Specifications
--------------
* Motor: 1-1/2 horsepower, 1 phase, 115/230 volt
* Maximum planing width: 13 inches
* Maximum planing thickness: 6-1/8 inches
* Maximum planing length: 14 inches
* Cutterhead: 4,500 rpm speed, 2-9/16-inch diameter
* Cuts per minute: 13,500
* Feed rate: 20 feet per minute (FPM) planing; 10 FPM molding
* Dimensions: 24 inches by 25 inches by 41 inches
* Weight: 258 pounds
* Warranty: 5-year, limited
P.when('A').execute(function(A) {
A.on('a:expander:toggle_description:toggle:collapse',
function(data) {
window.scroll(0, data.expander.$expander[0].offsetTop-100);
});
});
From the Manufacturer
---------------------
This JET planer/molder features a sturdy cast-iron table,
ed on four precision-ground steel columns for reduced
vibration and smooth feeding. It has fully adjustable
rubber-coated infeed and outfeed rollers, with a 1-1/2-horsepower
motor, which is fully enclosed, fan cooled, and is located at the
base of the machine to protect it from wood chips and dust. The
two matched V-belts deliver full power to the three-
cutterhead, while the two-speed gearbox provides smooth molding
and fast planing. The high-quality tool steel of the three steel
sets will provide a superior finish. Adding to the ease of
operation, all cutters under 2-inches in width may be installed
without removing the planing knives. It has a 13-inch-wide and
6-1/8-inch-thick planing and molding capability.
See more ( javascript:void(0) )