$608

Description

【REPLACEMENT DETAILS】: This CO2 laser tube Power: 40w /watt, Outer Diameter: 50mm, Length: 700mm, universal for AC 110V and 220V, you can get more details from the 2nd image. The laser tube adopts inner discharge tube coated with nano gold catalyst, power is improved, and service life can get 3000hr.
【WARRANTY】: Within 3 months receiving the laser tube, if there is any problem except for damage caused by man-made or improper operation, we will send a new laser tube for free or give a total refund. What you need to do is to message us through desertcart.
【TEM00 MODE】: The output laser is the TEM00 mode, which has high spot concentration, high energy density as well as good and stable spot, making laser machine with better performance.
【Pre-connected Wire】: There are pre-connected wires for matching positive and negative sides, make installation easy. If you need support during the installation and usage, please give us message through desertcart without hesitation.
【METAL HEAD】: With metal head, it is not easy to crack like the glass head laser tube, make service life longer.

Specifications: Brand: Mssoomm Power: 40W Length: 700mm ±10mm Tube Diameter: 50mm Installation Instructions 1. Determine the positive and negative poles of the laser tube (the end of the spiral glass tube inside the tube is positive and the light exit is negative). 2. The original positive and negative wires of the machine can be connected to the corresponding joints of the laser tube, and the insulation (mainly the positive high-pressure end) need to be sealed with a high-pressure tape or 704 silicon rubber. 3. Insert the inlet and the outlet water pipe into the water , usually the positive high-pressure line is the inlet, light outlet is the outlet, pay attention to the low into the high ( otherwise it is easy to cause cracking, burst pipe because the water is not filled ). 4. Adjust the optical path with the laser and test switch on the machine. The final target is to make the laser point enter from the middle of the entrance hole of the laser head, and then adjust the vertical optical path. 5. When the light path is adjusted, you can cut or use engraving, according to the actual situation to control the power output. Tips & Warning 1. You must check whether the water circulation cycle is normal and no bubbles before each use. 2. The cooling water should have at least 20 liters, water temperature is better between 59~68℉ or 15~20℃, change water every 2 weeks. 3. Please keep the high voltage electrode dry and clean, and keep it away from the metal to avoid damage to the main board. 4. The laser tube is fragile. Avoid local stress when installing and using. 5.The color of the laser from new tube or with sufficient power is purple or pink. The beam is thick and strong. When the power of the laser tube decreases, the beam is thin and the color is white.

Reviews

Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine

Fast Delivery to Antigua and Barbuda

Easy Returns & Exchanges

Ask About This Product

Similar Products

› Arts Crafts And Sewing › Beading And Jewelry Making

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Antigua and Barbuda. For more details, please visit our Support Page.

Frequently Asked Questions About Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine in Antigua and Barbuda

Where can I buy Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine online at the best price in the Antigua and Barbuda?

desertcart is the best online shopping platform where you can buy Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine available and ready for delivery in Antigua and Barbuda?

desertcart ships the Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine to St. John's, All Saints, Liberta, Potter's Village, Bolansand more cities in Antigua and Barbuda. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine online?

desertcart buys Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine on desertcart?

Yes, it is absolutely safe to buy Mssoomm 40W 40 watt Co2 Laser Tube Length 700mm Dia 50mm with Metal Head 3000hr Service Life for CO2 Laser Cutter and Engraver Machine from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.