DuraGoProfessional Series Front Vented Brake Rotor

I was pleased to find these rotors at such a great price. When they arrived I could tell that the metal composition was some kind of mixed alloy. I installed them right away with new brake pads that I bought at a local parts store. Since then, I put about 4000 miles on the car. Although, I don't drive like a ninety-year-old man, I am not a kid so my days of hammering the throttle and the brakes are long gone. I bought this car for a long commute and most of the miles are highway miles. About a month ago, I noticed a shimmy at the wheel when applying the brakes similar to the shimmy I had before I replaced the rotors. After installing the new rotors, the shimmy had disappeared. I rotated my tires and inspected the tie rod ends, lower ball joint etc and my only conclusion is that the rotors just weren't very heat resistant and are likely warped. I doubt that I will take them to get them turned. Having less metal on them will only allow them to warp faster than before. I'll have to buy new rotors. I saved the old ones which are definitely of a different metal composition. I may simply take them to get them turned and use them until I have to buy new again. These are going to the scrapyard.

Perfect fit for a 2006 Honda Civic hybrid for the front rotors. The same product fit both the right and left sides. The product appeared very similar to the OEM rotors I pulled off and is functioning as I would expect it to. This was my first time doing brakes and just a heads up to anyone preparing to do this for the first time...I had to grind out the two Phillips head screws holding in the old rotor as they were rusted and stripped very easily. That was the toughest part of the process. Everything else was pretty straight forward.

I did the right wheel first and everything worked great. When I went to install the left rotor, I noticed that the rotors are left and right specific. These rotors, or at least the 2 that I received, will fit the right side only. I ended up drilling and tapping new holes rather than trying to send it back. No where in the description does it state "left or right". Had I would have known that, I would have ordered the correct sides and would have been very happy with these.

Easy to install and identical fit to my old brake rotors. I replaced these rotors while changing my brake pads. It is recommended by car manufacturers to always resurface used rotors to ensure smooth connection between brake pad and rotor surfaces. Resurfacing rotors can cost between $15-$20 each rotor, so buying new Dura brake rotors is a smart and cost effective solution for your brake job.

They rusted quick and all over but performed well for about 10k miles. Then I got a pretty hard shudder every time I braked at highway speeds. I got what I paid for.

Good product for a budget build. A++ seller

They work for awhile after about 20,000 miles they became super warped. Not bad for a budget but I will be trying a bosch set up this time.

Works as advertised. Make sure that you buy the rotors for both left and right hand wheels.