Heat Transfer Vinyl HTV Black and White Bundle for T-Shirts Fabric- Iron On Vinyl for Cameo Silhouette and Cricuit- Bonus 1 Weeding tweezers + Cardboard folder

Description

DescriptionThese heat transfer sheets are made from Polyurethane（PU, which means they are soft and stretchedable for detailed and thin- lined designs. unuaST sheets are easy to cut and easy to weed. What's more, the weeding process reveals an adhesive layer which holds the design in place on the receiving garment. Application Instructions1. Prep your surface so it is clean and dry2. Pre-Heat iron to cotton(or hottest) setting ( No steam)3.Cut design in MIRROR IMAGE with a sharp 45-degree blade. Place heat transfer with matt side down and glossy side up because it is a matt heat transfer vinyl.Cut on backside in reverse. Perform a test cut first, adjust as needed4. Remove excess heat transfer material5. Preheat garment for 2-3 seconds6. Position heat transfer on garment with its polyester carrier (matt side) up protected by parchment paper ,craft paper or a thin cotton piece of fabric7. Apply heat at 300 to 320 F to the entire area of the heat transfer for 30 seconds per area using mediumpressure,hold, And repeat unitil it is firmly attached to garment8.Peel off clear liner cold when completeNotePlease refer to the user manual on the packing before use :-) This actual size of our unuaST heat transfer vinyl sheets is 12" x 10" sheet (+/- 0.5")