SEIRIONE Corner Shower Caddy Tension Pole, Quick Setup, Rust-Free Bathroom Shower Organizer Corner for Bathtub Shampoo Storage, 4-Tier Adjustable Shelf, Drill Free, Fits 34 to 116 Inch Height, Silver

We placed this "Shower Caddy" floor-to-ceiling in a stall shower with a tile floor and a drywall ceiling. We ordered the caddy in silver (not black), and all the parts are well finished. The finish seems to be polished stainless steel, not a chrome coating. We just installed the unit yesterday, so we don't yet know whether the caddy will show rust when the unit has been wet & dry, but the finish looks like it will stand up. It will depend on the quality of the stainless steel. The pole is composed of segments that are connected by siding the reduced-diameter end of one segment into non-reduced-diameter end of the next. There are 2-inch-diameter plastic "feet", one to abut the floor and the other the ceiling. The majority of the segments (all but the lower 2) are identical, so height can be adjusted in large increments by adding or removing segments during assembly. (Actually, one half-length segment is provided in case needed to achieve the right pole height.) The bottom segment is a tube inside a tube with a twist-to-lock mechanism, so fine adjustments to the height of the pole are made by adjusting how far the inner tube penetrates the outer one and twisting the inner one relative to the outer one to lock the position of the inner tube relative to the outer one. The mechanism that locks the inner tube to the outer one includes a compression spring, so even after the inner tube is locked in place, it can be pushed in & will exert outward force. As stated in the assembly instructions, we adjusted the pole (with the inner spring uncompressed) to be about 1-1/4 inch taller than the vertical span of the installation location, so the spring had to be compressed to install the pole; thus, the spring exerts the force needed to hold the pole tight against floor and ceiling. The overall result is a pole that is securely in place and reasonably stiff (not wobbly). The unit came with 4 wire trays and a few small accessory hooks & hangers (e.g., for a washcloth or small towel) that may be clipped to any of the trays. The trays are well made and hook onto the pole in such a way that they may be hung on the pole after the pole is installed in a tight corner. Ours sits about 2 inches out of the corner, but we think it could be wedged in a bit tighter. I don't have words to describe how the trays are attached, but they hang without any fastener, so they can be placed anywhere on the pole & are not constrained to be attached at particular positions. Part of each the tray's "hook" mechanism, where the mechanism contacts the pole, is rubbery plastic that prevents metal-on-metal abrasion & provides friction to hold the tray in place vertically. The Amazon description seems to say that the hanging mechanism is proprietary. Overall, we are well satisfied with the design. We will see how well the Shower Caddy stands up over time.

We've been using this product now for about 3 weeks. Finish seems to be holding up and it was fairly easy to install with no real problems. Instructions were easy to follow. I'm not sure why some were having issues putting it together, but if you're not mechanically inclined perhaps this is a complicated procedure. Loaded the trays with multiple bottles, soaps and such and so far its doing the job and looks nice. For those with issues, perhaps they're not tensioning the rod correctly. I followed the directions to make the rod about 2" (50 mm) longer than the opening I'm squeezing it into. This seemed to be an appropriate amount of tension once compressed as I haven't had any signs of movement despite the weight placed in the baskets.

After trying multiple shower storage solutions that didn’t work, this tension corner shower caddy was the answer. Assembly was straightforward, and the directions were clear and explicit — I had it installed quickly without frustration. The caddy feels sturdy, adjusts easily, and fits securely from floor to ceiling. Once installed, it stays firmly in place and holds all of my shower essentials without slipping. The design is clean and modern, and it looks great in the space — much better than adhesive or suction alternatives I’ve tried in the past. Overall, this is a well-designed, functional product that does exactly what it promises. I’m very happy with the purchase and hope it holds up well over time. So far, it’s been excellent. Highly recommend.

Very easy to install , great material and construction .

Fit: I can recommend this product for a tiled shower floor, or atop a tub ledge in excess of 3" wide. The more perpendicular the angle of the corner, the better. I cannot recommend for common shower inserts or tray floor that generally have concave corners. The closer you can snug the pole into the wall edges, the better. This allows the baskets to sit mostly flush to the wall, which prevents them from wiggling side-to-side and eventually shifting the support pole out of level. Ease of installation: Simple given a perfect application situation. But still i feel the support bases, which are about 2.5" OD prevent the pole from being correctly snugged into the corner. I ended up shaving both top and bottom base fittings (plastic) on a benchtop belt sander to get the pole sitting flush with wall, and atop my shower tray lip, which offered only ~ 1.375" of room to work with. I may end up permanently attaching the bottom base pad with marine grade epoxy if needed to help keep it in place. The kit does come with an anti-tip bracket with sticky pad wall attachment (pictured) to help secure it at midspan. I used this and have not had the support pole come loose after about 10 days of use. Functionality: Lots of pole pieces that press fit together to make up the height you need. As many as 8 sections to make up the highest of the adjustability range. It is good that this kit offers so much adjustability to different situations, but all the added joints end up giving the assembled pole 'wiggle'. It would be more stabile to make it out of fewer pieces, even if that meant requiring cutting to desired length at assembly. A simple hand hacksaw would do the job. But i guess the phrase 'cutting required' scares a lot of people these days :( Storage capacity: varies with how many of the 4 shelves you use. But the versatility is impressive, and the shelves will how several bottles each. Added optional features like towel bar, soap basket, and hooks are a nice touch. At this price point, i feel like the stability and weight bearing capacity are on par with expectation, yet not exceptional.